15 marras UMELINE FAQ ⑤- Verkko- ja tehdasasetusten palauttaminen

How do I change the default network mode
Contact technical support to provide the configuration file

How to restore factory Settings
· Long press the RESET key for 6-7 seconds [to restore factory Settings], and the device will have a speaker indicating “Restore factory Settings”. “Restore factory Settings” mode 1: There is a button next to some shaking devices with the English sign “Reset” (as shown below).

Method 2 : There is a hole in the body of the machine with the English sign “RESET” next to it, press and hold the hole for a few seconds with a pin or something similar (below).

Method 3 : Outdoor equipment and Grand Triangle panoramic equipment have wires, one of the wires is covered, take off the sleeve and press the button inside (as shown below)

Note: Restoring factory Settings will clear configuration information and device passwords. After the reset, you need to reconfigure the network and set the password.

· Restore factory default Settings
1) Clear WiFi information and IP configuration information
2) Clear user information (user name and password)
3) Clear the hotspot password
4) Enable the system voice prompt
5) Unbind the cloud service
6) Alarm

Function Sets the defense deployment status to off
b. Set the alarm area to all
c. Set the alarm time to an all-day alarm
d. Off alarm tone
8) Light control function
a. Lighting control set to [Automatic]
b. Clear the timing indicator Settings
9) Image property set to [Automatic]
Note: After the device is restored to factory Settings, you need to reconfigure the network.